F.A.Q.

We are based in Houston, TX since 2011. You are welcome to our facility.

Depending on demand, we have containers in stock. Most often this is the most popular 20ft BiTTank model. We are a manufacturing company and are ready to produce any number of containers for you of the models you need within 6-7weeks.

Our Mobile Mining containers are plug&play. There is a system of circuit breakers inside a container that allows to turn on/off each miner and control the load of the pod. All power and network cables are preinstalled.

Our Mobile Mining Containers are easily stackable by crane or forklift. The containers are strong enough to simply be placed on the ground, but you need to take into account the elevation above the ground to eliminate the risk of flooding.

The breakers inside a container are turned on/off manually. We can provide our customers with Smart Adapters that allow to meter voltage, temps and remote turn on/off each miner.

You will need a step-down 480/415v transformer.

We don’t have built in transformers because the space inside a container doesn't allow it.

We sell containers throughout North America, including hot states like Texas and cold states like Minnesota. All of our clients keep in touch with us and during the entire period of work there were no problems associated with hot or cold weather.

Miners that stand in close proximity to air recirculation channels receive an uneven amount of hot air, which can lead to overheating and malfunction. Therefore, it is better to refrain from installing air recirculation inside a container.

Once every 6 months.

Our mobile Mining Containers are:

• Built from scratch with reinforced metal structure;
• Equipped with premium electrical;
• Have insulated roof to prevent from the heat of the sun;
• Compatible with all major brand name ASICs and GPUs;
• Have one of the beat densities of mining equipment;
• Have a larger space between Z-louvers and filters for greater protection against dust and dirt;

We preinstall NOARK UL Breakers and we can complete your container according to your requirement after agreeing on the final price.

We provide you with Warranty and Service.

What assurance do I have with prepayment?

According to our terms and conditions, you have to pay 80% of a down payment, then 20% when the product is ready for your inspection and pick up from our Huston facility.

We are a well recognizable manufacturer that has been available on the market for many years already. Our history is easily trackable. You can visit our social media to make sure you deal with a trustworthy manufacturer.

We can send a proforma Invoice to help you proceed with payment.

You can find all the necessary information regarding weights, dimensions and other product specifications on our website https://www.Aiproenergy.com

The Hotbox Liu immersion tank has less than a 1 sq meter footprint. The dimensions of a dry cooler are various, depending on their model performance you are looking for. You can find all the necessary information regarding weights,dimensions, and other product specifications on our website https://www.Aiproenergy.com as well as reach to our team of specialists that can walk you through the process of selecting the best option for your set up.

The S19J miners have two fans on them, that are powered, and those fans circulate the oil. No pump is required becauseof the fans. No spoofers needed.

Bottom fans must be on and active. The oil is sucked down through the ASIC, then over
and back up through the heat exchangers.

Our immersion tanks are made of aluminum and fittings components are made of copper. Our immersion cooling systems are designed as a one-time investment that should last for a long time.

A single enclosure system is a perfect fit for 6 units of Antminer S19s. So far, it is not possible to use other types of miners.

41 gal.

Put stands in, put miners on stands, fill with oil, hook up electrical and Ethernet. Hook up water loop. Enjoy.

Minimum of 125amp 240v breaker, 90amp continuous usage.

Braiins OS+ powers the fans and monitors temperature. We are working on additional monitoring to be included.

There is no electrical savings, so the additional cost would be all the supplies required. Since all the electrical would berequired even for air, that would not be a factor. Only tank, oil, and dry cooler if required.

Around 15gpm.

The general maximum oil temperature we like to operate at is 140F (160F for the chip). There are many environmentalfactors that will need to be decided to properly scale dry coolers or other cooling such as geothermal, ground water, orsomething such as a lake or river.

The only electrical required is for the miners themselves. There is nothing electrically required for the Hotbox itself. If you want to have more than one enclosure connected a water pump and cooling system would be required, but that is separate from the tank and would have to be designed separately.

This is the main purpose of immersion cooling systems. There’s no secret that ASIC miners are extremely loud, especially when there are dozens of them. It’s not only irritating for your neighbors, but also quite dangerous for your hearing. When immersed, miners are maximally quiet. The only sound you’ll hear is a working dry cooler if you are operating ourcomplete immersion system.

Heat reuse is one of the reasons why we provide a water loop system. In such a system dielectric fluid circulates inside ofthe enclosure and rejects heat through integrated heat exchangers. You can connect cooling systems to our Dry cooler via the heat exchanger, or they can connect the enclosure to a home/ facility water circulation loop, if it’s possible. This way you can reuse the heat to warm your own house up. You can use enclosure systems to heat up wall mounted radiators, floor heating installations, entire swimming pools or hot tubs.

When it comes to overclocking, immersion cooling makes it possible to boost an S19 from default 110Th/s at 3250W per miner up to 155Th/s-165Th/s at 6500W.
The idea for immersion cooling is:

• the fluid has great heat absorption capacity which is many times better than heat 
• transfer capacity of air;
• much longer lifetime for miners and lower TCO;
• much higher hashing rate thanks to overclocking (which is not possible with air cooling) and faster ROI;
• no dust, no noise, no overheating, no chips or dashboards burning;
• fewer repairs and maintenance actions;
• possibility of selling miners after 2-3 years in the fluid as new.

In addition, it seems that cooling is more important than ever for the Antminer X19 generation. Lower temperatures are directly correlated to lower power consumption and better efficiency to a greater extent than with previous generations of Antminers. Optimizing your infrastructure and miner configurations to maintain as low of temperatures as possible can make a big difference in the performance of your rigs. Link to the source: https://ru.braiins.com/blog/impact-of-temperature-on-efficiency-of-antminer-x19s

We provide you with Warranty and Service

The difficulty in cleaning miners that have been immersed in a dielectric fluid is that it is not possible to simply take themout of the coolant and let them "dry". You can use special solvents to clean the miners hash boards (e.g., D100 DielectricSolvent by Engineered Fluids).

Once in two, three years. Typically, it may last longer in a clean and insulated environment.

We can send a proforma Invoice to help you proceed with payment.